Metalworking & PipeReference — Not a Buildable Spec
Pipe Fitting Math: Elbow Center-to-End and 45-Degree Offsets
How to calculate a pipe cut length through an elbow or around an offset, with a worked example.
Status
Every multiplier and the worked example were recomputed and check out. The factors work in millimetres with NPS as the nominal size in inches; in inches, a 90 degree long-radius elbow center-to-end is 1.5 x NPS.
Members Only
Sign in free to keep browsing Modern Monticello. Unlocks are one-time payments — no subscription.
632 entries inside. See what's inside. Or try one free: Wall & Roof Systems.
Sign In — Free